How to Clean and Protect Your Heat Press Platens


Photo  courtesy of Impressions Online article, Keys for Clean, Protected Heat Press Platen

Photo courtesy of Impressions Online article, Keys for Clean, Protected Heat Press Platen

Thank you Impressions Magazine for publishing Ben Robinson’s article on Keys For Clean, Protected Heat Press Platens. This is one of our most frequently asked questions here at Stahls’ because let’s face it, everyone makes mistakes and sometimes forgets to use a cover sheet or applies a transfer with the ink facing the wrong way. In this article, Ben Robinson of Hotronix not only gives suggestions on how to clean your heat press upper platen, but also how to protect it from future mishaps. Here’s what he said: 

KEYS FOR CLEAN, PROTECTED HEAT PRESS PLATENS, originally published in Impressions Online. Nothing lasts forever, but the better you take care of your heat press, the longer you can avoid a breakdown.   One of the most important tasks to do regularly is thoroughly clean your press’s upper and the lower platens. They should be kept free of not only dust or dirt, but also adhesive residue and ink. Once something gets on a platen, ongoing exposure to high heat usually means it won’t take long before it really adheres and can become very difficult to remove. Platens are best cleaned using a soft cloth (like an old T-shirt, for instance) and a glass or surface cleaner. Light soapy water also can be used, but do not use anything with abrasive grit in it. This will damage the platen’s surface. A great way to keep platens free of unwanted contaminants — as well as protect them from scratches caused by buckles and zippers — is to use upper and lower heat platen protectors. These are available in a variety of sizes and are treated with a non-stick surface coating. This slippery surface makes it easy to slide garments around when positioning. It also prohibits adhesive or ink from sticking to its surface. Platen protectors are easier to wipe off than a bare platen and, if some type of mishap occurs, it only costs about $30 to replace a platen cover. Alternatively, it costs about $300 to replace a platen. With the increased use of heat presses for curing sublimation and digital direct-to-garment prints, heat platen covers have become a necessity. Both of these processes result in a lot of gassing and residue, which you don’t want to get directly onto the machine. by Ben Robinson

If you’re interested in learning more about the upper or lower platen protector, as well as cover sheets which are also essential heat printing accessories, click here. 

Sharing is caring!

Leave a Reply

Your email address will not be published. Required fields are marked *